How To Change Rear Rotors On Ford F350 Dually?


Here are the general steps to change the rear rotors on a Ford F350 Dually:

  1. Remove the hubcap.
  2. Remove the caliper from the bracket.
  3. Remove the brake pads.
  4. Remove the rotor by pulling it off or using a hammer to tap it loose.
  5. Install the new rotor by sliding it onto the wheel studs and securing it with lug nuts.
  6. Install new brake pads into the caliper bracket.
  7. Reinstall the caliper onto the bracket and secure it with bolts.
  8. Repeat these steps for both sides of your vehicle.

Note: These are general steps, and specific instructions may vary depending on your vehicle’s make and model, so it is recommended to consult your owner’s manual or a professional mechanic for more detailed instructions before attempting this task.

What tools are needed to change the rear rotors on a Ford F350 Dually?

Tools needed to change the rear rotors on a Ford F350 Dually may include a brake caliper compressor tool, dual piston pump style, brake grease, wire brush, cloth rags, an assistant, 3/8 inch impact gun and 1/2 inch breaker.

However, it is recommended to refer to specific instructions for the year and model of the vehicle being worked on.

There are also several videos available online that provide step-by-step instructions for changing rear brakes on Ford F350 Dually trucks.

How often should the rear rotors on a Ford F350 Dually be changed?

According to Ford’s recommendation, the rear and front brakes should be serviced at least once every 12,000 miles or 12 months.

Brake rotors generally last around 70,000 miles but need to be inspected for uneven wear.

It is a good idea to have the thickness of brake rotors measured annually, but there is no specific mileage at which they need to be replaced.

The ideal time to replace brake pads is between every 10,000 and 20,000 miles, and rotors should be replaced between 50,000 and 70,000 miles.

Are there any special precautions that should be taken when changing the rear rotors on a Ford F350 Dually?

When changing the rear rotors on a Ford F350 dually, it is recommended to remove the axle hubs by removing the 8 bolts holding the axle shaft to the axle housing.

It is also important to properly break in new brake pads and rotors.

Additionally, it is important to clean the friction faces of the new brake rotor using a brake-cleaning agent and not use petroleum or silicon-based cleaners such as degreasers.

Can the rear rotors on a Ford F350 Dually be resurfaced instead of replaced?

It is possible to resurface brake rotors instead of replacing them, but it depends on the condition of the rotors.

If the rotors have surface issues that need to be fixed, then they can be resurfaced.

However, if they are too thin or damaged beyond repair, then they should be replaced.

How do you know if the rear rotors on a Ford F350 Dually need to be changed?

There are a few signs that the rear rotors on a Ford F350 dually may need to be changed.

These include:

  • Squeaking or grinding noises when braking
  • Vibrations or pulsations in the brake pedal
  • Reduced braking performance

If you notice any of these signs, it may be time to replace your rear rotors.

You can find tutorials and guides online for how to do this yourself, but if you’re not comfortable with car repairs, it’s best to take your vehicle to a professional mechanic.

Resource Links