How To Reset Check Coolant Additive On Ford F250?

|

To reset the Check Coolant Additive alert on a Ford F250, you need to navigate to the settings menu and select “vehicle” and then “Maintenance“.

The process may vary slightly depending on the model year and type of coolant used.

The Check Coolant Additive Light comes on every 600 hours to remind you to check the coolant levels.

Contents

How do I check the coolant levels on my Ford F250?

To check the coolant levels on a Ford F250, you can follow these steps:

  1. Park the vehicle on a level surface and turn off the engine.
  2. Wait for the engine to cool down before opening the hood.
  3. Locate the coolant reservoir tank under the hood.
  4. Check if the coolant level is between the minimum and maximum marks on the tank.
  5. If it’s low, add a 50/50 mixture of coolant and water until it reaches the proper level.

Some models may also have a “Check Coolant Additive” message that can be reset by sliding a lever located between R and D under the hood.

Is it safe to continue driving the vehicle if the Check Coolant Additive Light is on?

It is not safe to continue driving the vehicle if the check coolant additive light is on.

Overheating can cause engine damage, which can be very expensive to repair.

It is recommended to check the coolant levels and address any issues before continuing to drive.

Can I reset the Check Coolant Additive alert without going to a Ford dealership or mechanic?

Yes, you can reset the Check Coolant Additive alert in a Ford F-250 without going to a dealership or mechanic.

To do so, navigate to the settings menu and select “vehicle” and then “Maintenance“.

However, it is important to note that the Check Coolant Additive light comes on every 600 hours to remind you to check the coolant levels, so it is recommended that you check your coolant levels regularly.

Why is it important to check the coolant additive levels on a Ford F250?

It is important to check the coolant additive levels on a Ford F250 because it helps maintain the strength of the coolant and prevent damage to the engine cooling system.

The “Check Coolant Additive” light comes on every 600 hours as a reminder to check the levels, which should be changed every 60,000 miles or so.

While this does not indicate a problem, it is still important to keep up with regular maintenance to ensure optimal performance and longevity of your vehicle.

How often should I replace the coolant additive in my Ford F250?

The recommended frequency for replacing the coolant additive in a Ford F250 varies depending on the source.

According to the PowerStroke supplement to the Owner’s Guide, it should be changed every 3 years or 30,000 miles.

Another source suggests an initial replacement at ten years or 200,000 miles, then every five years or 100,000 miles.

A third source recommends an initial change at six years or 105,000 miles and then every three years or 45,000 miles.

The “Check Coolant Additive” light comes on every 600 hours to remind you to check the coolant levels.

It is best to consult your vehicle’s owner’s manual for specific recommendations.

Resource Links

Read More: